Product Details
- Amazon Sales Rank: #6337 in Car Audio or Theater
- Color: Black/red
- Brand: Rockford
- Model: P1S4-10
- Dimensions: 8.50" h x
12.00" w x
12.00" l,
7.00 pounds
Features
- 10-inch, 4-ohm subwoofer with 500 watts maximum power handling (250 watts RMS)
- Kevlar fiber reinforced paper cone with high-density poly-foam surround
- High-temp voice coil with spun-laced Nomex re-inforcement collar
- Flex fit basket for slight adjustments when mounted
- One-year limited manufacturer's warranty
- Features 2 Inch Copper Clad Aluminum Voice Coil
- Stamp Cast Frame Structure
- Features Flex Fit Basket Design
- Kevlar Fiber Reinforced Paper Cone
- 250 Watts RMS 500 Watts Peak Power Rating
Rockford Fosgate P1S4-10 Punch P1 SVC 4 Ohm 10-Inch 250 Watts RMS 500 Watts Peak Subwoofer
Product Description
Rockford Fosgate Punch 2011 or newer P1 or P2 Series Subwoofer Grille. A cost effective way to protect your subwoofer. Uses existing subwoofer trim ring.
Customer Reviews
Most helpful customer reviews
3 of 3 people found the following review helpful.
By Michael
I highly, highly recommend these speakers for purchase. I'd like to start off by saying that the construction of these subs is extremely good. The cone is kevlar reinforced paper which means that the likelihood of the paper tearing during bass hits is extremely low as Kevlar is used in bullet proof vests. The magnet and bottom portions of the speaker are situated in a metal basket and the positive/negative wires of the speaker are woven into the cone itself which reduces the likelihood of the wire overheating thus blowing the speaker. The main thing I really like about these subs is that they are CEA-2031 compliant, which means the subs can handle pretty much whatever you push through them, provided it is within specs. The subs also use anodized voice coils which allows heat buildup in the sub to dissipate, and these subs can dissipate heat up to 100 degrees (not talking about ambient heat, but heat temps for the sub itself.) I find that these subs are best when used with an 800 watt 2-channel amplifier at 400 watts per channel which is what I have in my car. As with any speaker or sub-woofer, take care of the sub and it will take care of you. As greatly constructed as these speakers are, if you set your gain up too high, bass level too high, or anything else beyond what these subs can handle and they will blow regardless. That goes for any speaker or sub regardless of its construction so just be sure to stay within what this sub-woofer can handle and they will last a long long time. Hope you find this review helpful. Thanks!!
1 of 1 people found the following review helpful.
By Mike P
I ordered and recieved these two subwoofers in great condtion. Factory sealed subwoofers. I have them wired into a 2ohm load on a alpine V12 mono amp. Each sub gets just under 190watts rms. and i would say they punch pretty hard. only have amp at half volume. Nice and sturdy construction. looks good, and included speaker rings as well as stickers. I would highly reccomend these subs to people who like hard hitting systems, however they wont hear you a block over or anything!! but they wont break the bank either!
1 of 1 people found the following review helpful.
By 2213
This packs a pretty good punch for a 10". I have it paired w/ a 250w rms amp in a small pickup truck w/ 2 Rock Fos 6x9s. It sounds really good in my truck. I don't think it is a real head-turner, but I want my music to sound good to me, not everyone outside. I know there are many more powerful, but this was perfect for my truck. I did have to put a spacer in my box, the speaker was ~3/16 too deep.
This Page is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED "AS IS" AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
